HP Version Control issues after upgrade from version 7.2.2.0 to 7.3.0.0

[SwisspostIT]

OK thanks for your feedback!

I'll do a fresh new install of VCRM 7.3 tomorrow to test, if the VCA 7.3 lists the firmware again...

Regards,

Ville

[SauliusB · Accepted solution]

I got confirmation from HP TS that isue with HP VCA 7.3.0.0 not showing BIOS, Firmware will be solved with next version of application...

Till then I'll be using 7.2.2.0 

[SwisspostIT]

good to hear that!

my case was elevated on wednesday to L3 so I think they will close it soon...

thanks and regards,

Ville

[SwisspostIT]

hi all,

for those who didn't notice it: 

HP VCA Version 7.3.1.0 was released which fixed the issue with not displaying BIOS & Firmware!

Regards,

Ville

[MDDunn]

Thanks for the update! Had not seen that yet.

[NJK-Work]

This solution worked for me too:

C:\HP\hpsmh\bin>smhconfig.exe -Z ALL:!ADH:!EXPORT56:!EXPORT40:DES-CBC3-SHA:RC4-MD5:RC4-SHA:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:!LOW:!eNULL:!aNULL

C:\HP\hpsmh\bin>smhconfig.exe -r

Thank you.

Nelson

[RobClarke41]

I can't seem to find a copy of  7.3.1.0 would you be able to email to me or something?

[MDDunn]

7.3.1.0

Bitly:

http://bit.ly/1gigt70

Full URL:

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3Didx%253D%257CswItem%253DMTX_497b39862a474e6c8317b18d22%257CswEnvOID%253D4064%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253Ddr...

[Jason Salgado]

Tried running the above command on my HP Sim server with VCRM 7.3 installed and I get:

C:\hp\hpsmh\bin>smhconfig.exe -Z ALL:!ADH:!EXPORT56:!EXPORT40:DES-CBC3-SHA:RC4-M
D5:?RC4-SHA:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:!LOW:!eN?ULL:!aNULL
warning: validation failed for value: 'ALL:!ADH:!EXPORT56:!EXPORT40:DES-CBC3-SHA
:RC4-MD5:?RC4-SHA:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:!LOW:!eN?ULL:!aNULL'
error: ssl-cipher-suite: invalid value 'ALL:!ADH:!EXPORT56:!EXPORT40:DES-CBC3-SH
A:RC4-MD5:?RC4-SHA:RC4+RSA:+HIGH:+MEDIUM:-SSLv2:+EXP:!LOW:!eN?ULL:!aNULL'

[Jürgen Büchs]

The BIOS and firmware updates dissappeared again after upgrading to 7.3.2.0.