HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HPSIM 4.1 Version Control Repository Problems

 
Annette Jones_2
Regular Advisor

HPSIM 4.1 Version Control Repository Problems

Loks like my repository is no longer working, when I load the VCRM agent and go to the Catalo tab, nothing shows, but all the custom software baslines are still available on the home page.

Also not one of my server (200+) are showing their software version status correctly, they are now either ! or ?, I guess this is because the repository is no longer workign ok.

Can anyone help, where on the local drive is the catalog held? Or can anyone off any additional help?

Regards
A
4 REPLIES
Albert Austin
Esteemed Contributor

Re: HPSIM 4.1 Version Control Repository Problems

Hi,

YOu could try to restart VCRM services. Default location should be C:\Repository

Albert
Annette Jones_2
Regular Advisor

Re: HPSIM 4.1 Version Control Repository Problems

Albert, thanks but done all the usual, restart services/restart server, but nothing shows in the catalog tab.
Albert Austin
Esteemed Contributor

Re: HPSIM 4.1 Version Control Repository Problems

Hi,
Have you tried to rebuild your catalog?
Maybe this link could help you more with your problem.

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00293365/c00293365.pdf
MsCindy
Advisor

Re: HPSIM 4.1 Version Control Repository Problems

Can you get to the SHP of your VCRM server? Try going to https://servername:2381. If you can not get there then that is your problem. I ran into the same problem once and a reboot resolved it. Good Luck!