HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

HPSIM 5.3

 
Kevin_H
Occasional Visitor

HPSIM 5.3

I currently have HPSIM5.3 installed on a 32bit W2K3 server.
I plan on upgrading my existing installation to 5.3sp1
If I run the 5.3sp1 installation on top of my existing database, will I retain my database files? Any headsup?
Thanks

1 REPLY
Kevin_H
Occasional Visitor

Re: HPSIM 5.3

Issue resolved. Upgrade completed as described in documentation of default upgrade (with minor exceptions).
Made copy of database (not needed). Notified our internal alert group of installation prior to upgrade. HPSim System sent numerous alerts during upgrade. Ran default upgrade. After reboot, existing shortcuts no longer worked. Created new shortcuts and access was successfull.
Database remained intact. Verified remote success.