HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HPUX 11.31 system and RESMON

 
Tom Haddad
Super Advisor

HPUX 11.31 system and RESMON

Receving this error.
fopen of file /etc/opt/resmon/log/client.log failed
Running EMS/STM B.11.31.05.06 and WBEM Services A.02.09
This is also a HPSIM managed node and Im using non-root user account for cim processes (for WBEM subscriptions (cimserver). Is it because this account does not have permissions to this log??

 

 

P.S. this thread has been moved from Insight Remote Support > general to ITRC HP Systems Insight Manager Forum - HP Forums moderator

7 REPLIES
Shinji Teragaito_1
Respected Contributor

Re: HPUX 11.31 system and RESMON

I believe your problem is the same as this one:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1332056

Can you find out which EMS client is running as non-root user ?
Tom Haddad
Super Advisor

Re: HPUX 11.31 system and RESMON

I dont understand your question but when I modified the credentials for this unix node in SIM I used a non-root user account which I have used on my other 11.23 nodes with no problem.
I may delete the node from SIM again and re-add it using root in the credentials..see what happens.
Michael Leu
Honored Contributor

Re: HPUX 11.31 system and RESMON

This error is most likely from a old version of the WBEM FCprovider. Check that you have at least version .0909 installed.

The newest version can be found here:
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=FCPROVIDER01
Tom Haddad
Super Advisor

Re: HPUX 11.31 system and RESMON

Thanks..
After upgrading, can I proceed to use a non-root account or what?
I make auhorization using CIMAUTH.
Tom Haddad
Super Advisor

Re: HPUX 11.31 system and RESMON

Today, I upgraded WBEM FCProvider to 0909.
Restarted CIMSERVER.
Under CIMAUTH Ive used my non-root user when granting permissions to /var/opt/wbem/repository namespace!

If I need to confirm ahything else, please let me know.thanks for the help!!
Shinji Teragaito_1
Respected Contributor

Re: HPUX 11.31 system and RESMON

What is the complete message in syslog.log ?

Does the rm_log_init message you encountered contains "Permission
denied" ? If so, the workaround is to specify root user when
configuring the WBEM subscriptions on a HP SIM managed node.
Only root user can write to client.log whose file permission is
644 (ownership is root:sys).

Does your rm_log_init message contains "Too many open files" ?
The latest WBEM FC Provider fixes this problem described below:
http://docs.hp.com/en/5900-0170/ch01s06.html

NOTE: HPUXFCIndicationProviderModule contains
HPUXFCHBAIndicationProvider which is one of EMS Wrapper providers
as of today and an EMS client.

Tom Haddad
Super Advisor

Re: HPUX 11.31 system and RESMON

My issue was resolved after upgrading WBEM FCProvider to 0909..thanks.