HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Help configuring discovery

 
Jaime B
Occasional Visitor

Help configuring discovery

Hi there. I'd like to configure my newly installed SIM 5.1 to only discover servers that are powered on and already have the SIM agent installed. Is there a way to do this?

Thanks,
Jaime
3 REPLIES
David Claypool
Honored Contributor

Re: Help configuring discovery

Yes, you can do this using Discovery Filters.
Jaime B
Occasional Visitor

Re: Help configuring discovery

I tried that.. I checked 'discovery filters', checked the box for 'servers', and picked the radio box for 'Manageable systems with HP agents only'. It still picks up every server in the IP range, regardless of power state or agent install. The servers that don't have the agent will come up as 'SERV_XXXXX' (with the x's being the serial). That's the what I don't want.. there's so many that it makes browsing the SIM interface a chore.
David Claypool
Honored Contributor

Re: Help configuring discovery

Uncheck "Automatically discover a server blade when its Integrated Lights Out management processor is identified" and you should be fine.