HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

How to enable HDD Predictive Failure on HPE SIM

 
Grimaldy Soto
Frequent Advisor

How to enable HDD Predictive Failure on HPE SIM

I've been looking over the Internet on how to accomplish this but I haven't found a solution yet.

I received notification from HDD which fails but I also want to received notification for HDD that will fail.

 

what I have found is this:

In SIMS, go to Options, Events, SNMP Trap Settings.
Click the drop down box by MIB name and select cpqida.mib
CLick the drop down box by Trap name and select (SNMP) Physical Drive Status Change (3046)
In the Severity box, select critical.

But that already configure in that way.

I went to the last server in which this ocurred, a generated alert for a predictive HDD Failure, and looked into the logs for the MIB responsible and the its cpqida.mib so I don't know exactly where to look

Any help would be very appreciate.


When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been and there you will always long to return.

— Leonardo da Vinci