How to get Temperature information from Proliant using WMI or SNMP

[Patrick Viquerat]

Hello,

We would like to get the temperature informations from Proliant servers using a script, and then store them in a DB for historical graphics.

I know there are some Temperature probes on Proliant, I can see them in the System Management Home Page. But is there a way of getting those values using WMI, SNMP or something else ?
If Yes, how (SNMP OID)?

Thanks for your help

Patrick

[Sam Record · Accepted solution]

Patrick, did you try this:

CPQHLTH-MIB:cpqHeTemperatureTable

OID 1.3.6.1.4.1.232.6.2.6.8

(I realize I'm responding to an old post, just noticed it now while looking for the answer to another SNMP problem.)

[Goz]

thanks, Sam!!

[Server-Support]

Where to type that command in SIM ?

[angar0202]

Greetings to All
 I use this oid but I did not return any value, I have to fix something, I could help.

 And if I use the command wmic get temperature and does not work, I have to activate something on the computer

command list WMIC

http://ss64.com/nt/wmic.html

---

@Sam Record wrote:
Patrick, did you try this:

CPQHLTH-MIB:cpqHeTemperatureTable

OID 1.3.6.1.4.1.232.6.2.6.8

(I realize I'm responding to an old post, just noticed it now while looking for the answer to another SNMP problem.)

---

[Rancher]

How exactly do we usee this command?  Does WMI need to be installed in the SIM server?  I need a report of internal temperatures and the HP report does not bring up those values, even though you can see them on the home pages.