Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

How to manually add a workstation to HP SIM

Orlando Amador
Occasional Contributor

How to manually add a workstation to HP SIM

Me add workstations and servers manually to our HP SIM 5.2 SP2 server. This is done using manual discovery.

I having a problem with one workstation. The workstation is added manually, but is does not display in the system list of the web interface.

I went to the SIM server and from the command prompt I can see the system list using mxnode. I remove the workstation and add it back using mxmode, but it still does not show in the system list in the web page.

Any ideas?
3 REPLIES
fred Passeron
Honored Contributor

Re: How to manually add a workstation to HP SIM

Hi

Are you checking the all system list or another filtered collection like all servers ?

The workstation should at least appear in the all system list. Check its IP address and see if you can find it , it may ne that the workstation is not properly identify thus appearing as unknown...

Hope it helps

fred
“Life is pleasant. Death is peaceful. It's the transition that's troublesome.” Isaac Asimov
Orlando Amador
Occasional Contributor

Re: How to manually add a workstation to HP SIM

The workstation does not show on any list. The only place it show is when using mxnode from the command line.
Orlando Amador
Occasional Contributor

Re: How to manually add a workstation to HP SIM

Thanks for the response, I just added the workstation again, and now it show in the all system list. :-S
Thanks again.