HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Hyperlink to command view EVA

 
SOLVED
Go to solution
Richard Munn
Frequent Advisor

Hyperlink to command view EVA

We have a number of SMA each controlling several EVA's. SIM has discovered the SMA and the EVA's just fine. If you navigate to an EVA under Tools and Links there is a hyperlink to command view on the SMA which should go direct to the EVA in command view. The SMA has the CMS certificate loaded in command view to form a trust relationship.

But if you clcik on this link, instead of trying to link to https://:2372/command_view_eva it tries to go to a huge URL that starts as https://SMA:2372/Proxy/SSO? etc. and you end up with a blank page. BTW if you use the former URL you get the CV login page and everything works just fine.

I'm sure this is not what is supposed to happen but there is no indication of what is wrong. Any Ideas?
3 REPLIES
David Claypool
Honored Contributor
Solution

Re: Hyperlink to command view EVA

Since you refer to SMA, my guess is that you are running an older version of CV that doesn't support HP SIM SSO.
Richard Munn
Frequent Advisor

Re: Hyperlink to command view EVA

David, you are spot on.
We have some quite old CV versions simply because of CM restrictions. The new ones (V9) work just fine. Thanks.
Richard Munn
Frequent Advisor

Re: Hyperlink to command view EVA

We ere able to upgrade one SMA and the hyperlink works fine so old versions (we go back to V6) have problems.