I want to add a manual discovery custom tool

[Richard Klimitchek]

I want to add a custom tool that will do a manual discovery.  I want it to add "Manual Discovery" to the "Options" drop down and when selected I want it to prompt for an ip address or system name and then do the discovery. 

I suspect the command I need is "mxnode -a <ip address>".  However I don't know how I can get the tool to prompt the user for the ip address.

[Brad Cunningham]

from the cli run

mxglobalsettings -s showmanualdiscovery=true

You should then see the manual discovery button