Identification On Server Fails

[Gareth H Wilson]

i have this server in a different subnet to other servers i monitor, HP SIM discovers it ok but when i try to "identify" it comes back with a failure

heres the log from the failure, does anything stick out as i cant seem to find exactly what its failing on

Starting identification process...
Checking for known running web servers.
Checking for System Management Home Page and other HP web agents.
Received a response from the system management homepage, this system supports SMH.
Checking for WBEM support on system.
This system does not have any SMI-S CIMOM installed
This system doesn´t have a server CIMOM installed, or cannot connect to it using all credentials specified
Running WBEM rules based identification.
Got ComputerSystem WBEM/WMI data from the system
Running WS-Man identification.
Checking for SNMP support on system.
The system responded to a SNMP request, it supports SNMP.
Running SNMP base Cluster identification using common cluster MIB.
This was not a system with the common cluster MIBs supported.
Running HP ProLiant management agent identification
System has the SNMP ProLiant server (foundation) agents installed, adding system type.
Running HP NetServer identification.
System supports the NetServer SNMP agent, adding system type
Running HP-UX SNMP identification.
System does not have the HPUX SNMP agents installed.
Running SNMP System Type Manager identification.
No matching SNMP System Type Manager rule was found.
Checking for DMI protocol support.
The system does not have Windows DMI support.
Running DMI System Type Manager identification.
The system does not have Windows DMI support.
Running HP-UX DMI identification.
The system does not have HP-UX DMI support.
Running HP/Compaq Desktop identification.
The system does not have Windows DMI support.
Running HP DMI Desktop identification.
The system does not have HP DMI Desktop support.
Running Generic DMI identification.
The system does not have Generic DMI support.
Checking for SSH protocol support.
The SSH protocol is not supported on this system
Running Storage identification.
Did not detect WBEM support on this system. Will not attempt storage identification. If this is a storage host, check WBEM credentials and make sure the providers and CIMOM are operational on the host.
Storage identification completed.
Running HP Service Guard Identification.
The system is not part of HP Service Guard cluster
idPluginStart.IPMCompatible
Running VM identification.
Checking for license data on system.
SMH trust status is true.
Running limited data collection for common attribute.
Done with limited data collection, checking retrieved data.
Building system relationships.
System identification done with this system.

Cheers in advance

[David Claypool]

What hardware is it? What OS? What version of the PSP?

[Gareth H Wilson]

DL380, Windows 2003, PSP 791

hope this helps :)

[dospavlos]

Find a fix for this one? I'm having a problem with it not picking up wbem. Server shows a sucessful login from user setup in sim to poll wmi.