Insight Manager agents don't send trap to SIM console

[Domenico Viggiani]

I'm not receiving traps (events) from a HP ProLiant ML350 G4p with HP Insight Manager Agents installed.
Using 'tcpdump', I'm not able to see any trap exiting from the system, when I remove a power cable, for istance, thus it is not generated at all. But I'm able to see events logged locally on console and on /var/log/messages file but no events on the HP-SIM console.
For other systems with similar config, it works.

This is the environment:
- Linux Red Hat 4 (32 bit)
- hpasm-7.6.1-4.rhel4 package installed
- hpsmh-2.1.5-146 package installed
- net-snmp-5.1.2-11.EL4.6 package installed
- net-snmp-libs-5.1.2-11.EL4.6 package installed

# /etc/snmp/snmpd.conf
dlmod cmaX /usr/lib/libcmaX.so
rwcommunity xxxxx localhost
rocommunity xxxxx localhost
rwcommunity xxxxxx
rocommunity xxxxxx
trapcommunity public
trapsink hpconsole.mydomain.it
syscontact admin@mydomain.it
syslocation "MyCompany S.p.A."
load 12 10 8
informsink hpconsole.mydomain.it
trap2sink hpconsole.mydomain.it
smuxpeer .1.3.6.1.4.1.674.10892.1

Any help?

[Rob Buxton]

I think the trapsink also needs a community name; e.g. trapsink hpconsole.mydomain.it xxxxx
where xxxx= RW Community name.

You might also want to check you have the latest PSP, 7.80 is the latest available.

[Domenico Viggiani]

I will try... even if I don't have a similar statement where alarms work.
In the meanwhile, can you explain because I need to specify ReadWrite community in 'trapsink'?

[Rob Buxton]

Sorry - that should be RO Community name.

[Domenico Viggiani]

Nothing to do.
I don't even see trap leaving server, using 'tcpdump'. It is not generated at all.

Please help me!