Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Installation cannot be done on the local HP SIM CMS?

Kelly Computer Services
Occasional Visitor

Installation cannot be done on the local HP SIM CMS?

Hi Guys,

I have ran into an issue whereby I have downloaded HP SIM 5.3 onto an old Proliant ML150 G3 server, gone through the setup process, but when trying to install and configure the SNMP and WBEM agents, I get the following error:

Installation of agents and providers (DONE) ........................ [SKIPPED] Installation cannot be done on the local HP SIM CMS.

I have had this working on other servers which are both the CMS and had SIM agents installed.

Can anybody help me and point me in the right direction? I can't figure this one out?!??

Thanks. :)

Keith
2 REPLIES
David Claypool
Honored Contributor

Re: Installation cannot be done on the local HP SIM CMS?

The ProLiant Support Pack is not available for 100 series so this is expected behavior.
Kelly Computer Services
Occasional Visitor

Re: Installation cannot be done on the local HP SIM CMS?

Thanks David - that would explain it. :)

Is there any HP software available that would allow me to see the health status of the physical hardware?

I suspect this server is failing.

Many Thanks.