HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Installing and Configuring SIM to use APC- UPS's

 
Jon Andrews
Occasional Contributor

Installing and Configuring SIM to use APC- UPS's

Has anyone installed and configured a MIB for APC (UPS) monitoring thru SIM 5.0 SP4?? If so what do you recommend??

Thanks
Jon A.
1 REPLY
Rob Buxton
Honored Contributor

Re: Installing and Configuring SIM to use APC- UPS's

I had an issue with an APC UPS here as every time HPSIM polled the device it generated a Login failure that the APC then reported as an alert.
Typically MIBs are obtained from the vendor and compiled into HPSIM using the mcompile and mxmib commands.