Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Integrating iLO2 with HP SIM 5.2

TeploukhovAA
Occasional Contributor

Integrating iLO2 with HP SIM 5.2

Hi all!
I'm using DL 360G5 server. I'm deploy HP SIM 5.2. I'm enter default Administrator login and password which is come with server for iLO2. I'm also enable enable Evaluation License for iLo2 for 60 day. Current version Firmware 1.43.
I have one hardware server DL 360G5.
I configure in iLO2 interfeice Administration-SNMP/Insight Manager Setting. To send alerts i'm clic "Send Test Alert".But in HP SIM I don't receive test alerts.

Why? what is incorrect?

Thank you.
6 REPLIES
Rob Buxton
Honored Contributor

Re: Integrating iLO2 with HP SIM 5.2

Is this just from an ILO?
Have you tried sending a test snmp trap from a server?
Have the ILOs been discovered and correctly identified in HPSIM?
TeploukhovAA
Occasional Contributor

Re: Integrating iLO2 with HP SIM 5.2

I dom't send test snmp trap from server.
iLO wasn't found and not don't identified in HP SIM.
In instruction I read: to integrating iLO2 and HP SIM receiving SNMP alerts in HP SIM from iLo2.
V Deepak Kumar
Regular Advisor

Re: Integrating iLO2 with HP SIM 5.2

Make sure "Accept SNMP Packets from any host" is checked under SNMP service in CMS as shown in the attached image.
Performance is compulsion and not an option if my existence is to be justified.
TeploukhovAA
Occasional Contributor

Re: Integrating iLO2 with HP SIM 5.2

Thank you for answer.
I'm configure SNMP-service as image, but don't receive SNMP test. What is the setting in HP SIM for SNMP?
Rob Buxton
Honored Contributor

Re: Integrating iLO2 with HP SIM 5.2

If the ILO has not been discovered then its quite likely that it's either not in the discovery range and/or does not have snmp configured correctly.

You need the same community naes configured in HPSIM as you're using on the ILO.
The ILO also needs to allow the HPSIM server access.
As the above poster has said, having Allow All Hosts ticked for SNMP on the HPSIM Server also helps.

I have the ILO and Server subnets in the HPSIM discovery range. This way both are discovered and HPSIM should associate the ILO with server.
TeploukhovAA
Occasional Contributor

Re: Integrating iLO2 with HP SIM 5.2

For Rob Buxton. You said:The ILO also needs to allow the HPSIM server access.
Where is this setting?
I configure in iLO2 interfeice Administration-Management:
Configure and Test SNMP Alerts:
1. SNMP Alert Destination(s): ip-adress DL 360G5.
2. iLO 2 SNMP Alerts: Enable
3. Forward Insight Manager Agent SNMP Alerts: Enable
4. SNMP Pass-thru: Enable
Configure Insight Manager Integration:
1. Insight Manager Web Agent URL: https://computer's name DL 360G5:2381
2. Level of data Returned: Enable(iLO2+Server Association Data)
I have one hardware server, when I want to discovery DL 360G5, I receive: server is exist.