Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Integrity server trap

Pawan Rawat_1
Frequent Advisor

Integrity server trap

HI

We have some rx integrity server .Today one power supply failed in one rx3600 server.but we received no trap in hp sim 5.3 installed in windows 2003.server shows as managed in sim.
What I need to do so that i can receive hardware failure trap e.g. smps failure in hp sim for rx integrity server

Thanks
Pawan
5 REPLIES
David Claypool
Honored Contributor

Re: Integrity server trap

Use 'Manage Communications' in HP SIM to help diagnose whether your rx server is configured properly.
Shiv007
Frequent Advisor

Re: Integrity server trap

Hi Pawan,

follow the below steps

Sign into HP SIM through your browser. You must have rights to add systems.
1. Add the WBEM credentials to the global protocol settings. Select Optionsâ ¢Securityâ ¢Global Protocol Settings, and add the root/password credentials under the WBEM settings section.
2. Discover the systems. Select Optionsâ ¢Discovery, and select Manual Discovery.
Add the system name (fully qualified DNS name is best).
(Optional) Verify that HP SIM has correctly discovered the system.
The simple way to do this is to type the name of the system into the Search panel and click Search. When the search completes, select the system and then select Properties from the menu (select Toolsâ ¢System Informationâ ¢Properties), and then click Run Now.
The resulting page includes data that is only retrieved through WBEM.
3. Subscribe for SNMP Traps.
Select Optionsâ ¢Eventsâ ¢ SNP traps, and then click Run Now. The task starts and should complete with no errors.

Thanks
Shivaprasad
Pawan Rawat_1
Frequent Advisor

Re: Integrity server trap

Hi David and Shiv

Yes it gave error in manage communication,I repaired it as per instruction and everything repaired successfully,I have deleted and discovered the system again,now it is showing no error in manage comm.In ID,EVT and run tool tab it is showing positive messages.
Now two questions
Hardware status is showing normal even when one of the Power supply is down in this rx 3600 server,I have status polled this server
Second,Will I get the trap after installing second power supply in server or do I have to do something more for this

Thanks
Pawan

Shiv007
Frequent Advisor

Re: Integrity server trap

Hi Pawan,

You should be getting the event for Power Supply Insertion as well.

Please the MP System event logs also.

MP> CM > SL>
select live events here and then insert you Power supply cable.

Thanks
Shiv
Pawan Rawat_1
Frequent Advisor

Re: Integrity server trap

Hi Shiv

No i did not get any trap in sim for power supply insertion.Yes there are logs in mp System logs for power redundancy lost/gained but how i can forward this in HP SIM.

Thanks
Pawan