Is there a way to integrate HP SIM to any other application.

[Mahmoud Ibrahim]

Hi,

To lanuch iLO interface, you may open your server SMH  https://localserver:2381

In home section, you will find Management Processor section which includes the status for the iLO network card and link to launch iLO interface.

Check  my attachment I am pointing to the link to launch iLO interface.

[Mahmoud Ibrahim]

Hi Priya,

Regarding your question related to run actions in Automatic Event Handling

Yes, you can lauch any executable, but this has to be added as Custom tool in HP SIM which is very easy process.

Select a custom command from the dropdown list.

Custom Command tools are created under ToolsCustom Commands option.

Refer to Custom Command Tools - Creating a Custom Command Task for more information.

You can read more about Automatic Event Handling on this link

[sreepriya]

Hi Mahmoud ,

On my setup I am not getting any Management Processor. It is saying as "none".

What i need to do to put some Management server there.

Attaching the screenshot .

Thanks,

priya

[Mahmoud Ibrahim]

Hello again,
This may be because either HP Insight Managment Agents are not installed correctly or your SNMP is not correctly setup
For assumption #1 you may reinstall Proliabt Support Pack by downloading it from HP website or you will find it in you smart start DVD
#2 install snmp service and configure both community string and trap destination