MDS600 traps to HP-SIM

[Pantera]

We ve HP-SIM configured before, works normally.

I installed 2nd SIM as bacup. But 2nd SIM does not show MDS600 disk failures etc, does not receive traps

What is the procedure?

Where can I find detailed tutorial about HP-SIM

[Andrew_Haak]

Look for a trap community and ip or host destination config on the mds600.

I can't open the below link to a pdf about the mds600, perhaps you can open it?

http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02775487&lang=en-us&cc=ushttp://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02775487&lang=en-us&cc=us

[Pantera]

I have looked to all configs, no trap destination set. But Old SIM can get Disk failures etc, credentials are correct. But new SIM can not get failures.

Is it possible hat 7.5 is not compatible with old agents, How can I check H sim Agents version and it's configuration on OS?

[Pantera]

Does SIM get failures from SAS switch or From OS Storage Administrator?

[Pantera]

alot of errors like below on SAS switch:

vsm user.err : [ISMICMaster] @@@@@@ Block29: Unknown opcode=4

[Andrew_Haak]

If you look for the errors that you get for the MDS600 that you do get do they seem to be traps?