Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

MDS600 traps to HP-SIM

Pantera
Advisor

MDS600 traps to HP-SIM

We ve HP-SIM configured before, works normally.

I installed 2nd SIM as bacup. But 2nd SIM does not show MDS600 disk failures etc, does not receive traps

What is the procedure?

Where can I find detailed tutorial about HP-SIM

5 REPLIES
Andrew_Haak
Honored Contributor

Re: MDS600 traps to HP-SIM

Look for a trap community and ip or host destination config on the mds600.

 

I can't open the below link to a pdf about the mds600, perhaps you can open it?

 

http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02775487&lang=en-us&cc=ushttp://h20565.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c02775487&lang=en-us&cc=us

Kind regards,

Andrew
Pantera
Advisor

Re: MDS600 traps to HP-SIM

I have looked to all configs, no trap destination set. But Old SIM can get Disk failures etc, credentials are correct. But new SIM can not get failures.

Is it possible hat 7.5 is not compatible with old agents, How can I check H sim Agents version and it's configuration on OS?

Pantera
Advisor

Re: MDS600 traps to HP-SIM

Does SIM get failures from SAS switch or From OS Storage Administrator?

Pantera
Advisor

Re: MDS600 traps to HP-SIM

alot of errors like below on SAS switch:

 

vsm user.err : [ISMICMaster] @@@@@@ Block29: Unknown opcode=4

 

Andrew_Haak
Honored Contributor

Re: MDS600 traps to HP-SIM

If you look for the errors that you get for the MDS600 that you do get do they seem to be traps?
Kind regards,

Andrew