HPE Community
Server Management - Systems Insight Manager
1751935 Members
4760 Online
108783 Solutions
New Discussion

MSA500 and HP SIM 5.0

 
SOLVED
Go to solution
Martien Korenblom
Frequent Advisor

‎12-21-2005 07:47 PM

‎12-21-2005 07:47 PM

MSA500 and HP SIM 5.0

Hi,

HP SIM does not 'see' my storage.
HP SIM is installed on the same server (a ML350 G3) as where the MSA500 is attached.
The latest Proliant Support Pack is installed on the server. Storage Essentials is NOT installed on the Central Management Server.

Martien
I don't have a solution, but I admire the problem
0 Kudos
Reply
1 REPLY 1
fred Passeron
HPE Pro

‎01-12-2006 05:27 AM

‎01-12-2006 05:27 AM

Solution

Re: MSA500 and HP SIM 5.0

Hi

According to the following doc, the MSA 500 is not supported. Only MSA1000 and 1500 are.
http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/msa_provider.pdf

To get your storage discovered by HPSIM, you need to install a SMI-S provider on one of the server connected to the storage box.

Volumes created on the array and presented to the server (logical drives) can be monitored with PMP (to get performance data) and disk usage thresholds can be set as well through the system maangement homepage.

regards

frederic.
“Life is pleasant. Death is peaceful. It's the transition that's troublesome.” Isaac Asimov
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.