MSL6030 management with SNMP

[Miguel Ángel Ripalda]

Hello,

I want to manage my MSL6030 with HP-SIM using SNMP, but don't know how to configure SNMP at MSL6030, and couldn't find anything at manuals...

Could anyone help me?

Thanks in advance and best regards

[fred Passeron]

Hi

Check the following document on page 11.

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00057439/c00057439.pdf

It describes how to manage MSL tape libraries with HP SIM though snmp.

Hope it helps !

regards

fred

[Miguel Ángel Ripalda]

Thanks a lot,

finally I could have a look at the doc you recommended me... but when I have tried to do what it says at page 11, it doesn't work:

The doc says that MSL libraries have a management card accesible through HTTP, and imlpemented the MIB... OK, I tried...

I opened the browser and accessed the management interface, checked that firmware version for the StorageWorks e1200-320 4G Interface Controller was 5.7.1f (greater than 4.23, OK)... but there's no 'Setup->Notifications' section at the management GUI...

What am I doing wrong?

Thanks in advance and best regards

[Martin Smoral]

Did you check the SNMP setting on the E1200-320 ? it has to match the SIM Server settings.

[Miguel Ángel Ripalda]

Thank you... that was the point... I was so silly that only tried with the other IP.

Best regards