Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Management Processor shows warning in SMH

Marco Mathiesen
Occasional Advisor

Management Processor shows warning in SMH

Hello Everyone ,

i've a problem with a SMH on a DL385.
The "Management Processor" shows a warning.
When i'm opening the link following appears :

Controller Type: undefined
State: Enabled
NIC Condition: Unknown
IP Address: 0.0.0.0
URL: https://0.0.0.0 (Unknown)
Hardware Version: undefined

What is' causing this problem and what can i do to fix it ?

Thx for ya' help.....
8 REPLIES
David Claypool
Honored Contributor

Re: Management Processor shows warning in SMH

Is the iLO connected to the network? If not, it is correctly reflecting that there is a link down. Either connect to the network or disable the Remote Insight sub-agent in the Management Agents applet in Control Panel.
Marco Mathiesen
Occasional Advisor

Re: Management Processor shows warning in SMH

The iLO is connected to the network and full functional. I've disabled those Agent on the system but still the "same" problem.
Any other suggestions ?

danail denev
Advisor

Re: Management Processor shows warning in SMH

Is the problem the same when you use SNMP as 'data source' and WBEM.
Marco Mathiesen
Occasional Advisor

Re: Management Processor shows warning in SMH

when i'm switchin' to SNMP the "Failed" item is gone...
JasonWoerner
Frequent Advisor

Re: Management Processor shows warning in SMH

I have the same issue on several servers. Switching to SNMP data within the Systems Management Homepage makes the problem invisible. But for users of Systems Insight Manager the problem remains. How can WBEM's view of the Management Processor be fixed? Is this a bug?
cemperor
Occasional Advisor

Re: Management Processor shows warning in SMH

Jason,
Your need to DISABLE "Network Interface Adapter" in iLo configuration utility (either by windows program or by BIOS setting) if you don't have the iLO port plugged.

Disable it makes it green and peace on the SIM radar.
Rudi Gabler
Occasional Visitor

Re: Management Processor shows warning in SMH

Hi Marco,

I had the same problem with a DL360 G3 Win 2003 . When I updated the http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=316558&prodNameId=3288138&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-e172e8cdd36f4f9b9e53a7a622

ILO drivers for windows the Nic was recognized by WBEM and the error disappeared. Now the real iLO address is used.

Regards,
Rudi Gabler
smissaire
Occasional Visitor

Re: Management Processor shows warning in SMH

I have the same problem and I passed to 1.15.0.0 but still one orange triangle before Management processor is it possible to help me?