HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Management Server URL

 
Peter Svensson_1
Occasional Contributor

Management Server URL

I would like to monitor my ProCurve switches with Insight Manager 5.0
There is a configuration you can make in the Web-interface of the ProCurve Switch. Namely "Management Server URL". But how do I know what to type? I know the dns name of my Manage Server. Should that name go in there?

Regards Peter
2 REPLIES
Rob Buxton
Honored Contributor

Re: Management Server URL

Not too sure, it may also be referring to the Procurve Manager.

Typically you would configure SNMP on the switch. It would need to allow SNMP access from the HPSIM Server on a defined community name and would also need the SNMP Trap Destination set to point to the HPSIM Server.
That's all that's required for the Storageworks/Brocade switches, plus a DNS entry if you want a name associated in HPSIM with them.
Peter Svensson_1
Occasional Contributor

Re: Management Server URL

Ok. I tried that and it worked. Thanx for the reply.