Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Network Appliance MIB

Network Appliance MIB

I would like to send SNMP traps from a NetApp FAS270c Filer to HPSIM 5.1. What is the recommended method for accomplishing this task? Has anyone had any success?
I have compiled and registered "netapp.mib" from the Filer in HPSIM. I receive traps, but they are generic (see attached).
4 REPLIES
Rob Buxton
Honored Contributor

Re: Network Appliance MIB

That seems to be suggesting that you need an updated MIB.
But it does look as though you have the process right.
Perhaps the firmware on the appliance is more recent than the MIB you've got.

Re: Network Appliance MIB

I copied netapp.mib from the filer to the HPSIM server.
Jae Ellers
Occasional Advisor

Re: Network Appliance MIB

Rodrigo.Cortez
Esteemed Contributor

Re: Network Appliance MIB

Chris, try the attached MIB file. I went into a similar situation as yours and that file had helped me.
Rodrigo.Cortez