HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

No Information visible in HP SIM for HP Fibre Channel devices

 
SOLVED
Go to solution
deceit
Advisor

No Information visible in HP SIM for HP Fibre Channel devices

Hi All,

I have 2 x c-class enclosures with 2x HP 4GB Fibre Channel Pass through interconnects located in each.

Should I be able to see information on the devices through insight manager? I wasnt sure due to them being dumb devices but it would be nice to know that they are at least "OK" with a Green Tick, not a grey line....

See Attached
1 REPLY
David Claypool
Honored Contributor
Solution

Re: No Information visible in HP SIM for HP Fibre Channel devices

Well, yes and no. Your passthrough module status is going to actually be reflected in the overall status of Onboard Administrator. I know it's not intuitive, but in the view you show, you're seeing a database entry in HP SIM, but to HP SIM it isn't really a "managed" device because it doesn't have an IP address. That's the reason for the gray tick.