Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Only want to monitor servers

 
cbehrent
Occasional Contributor

Only want to monitor servers

When doing a discovery over the network it is finding everything while we only want servers.

Because it is picking up desktops, i get alerts everytime someone turns it on and off.
3 REPLIES
Albert Austin
Esteemed Contributor

Re: Only want to monitor servers

You can limit your discovery to servers by deselecting unwanted ones from
OPTIONS->Discovery and then click on Configure General Settings link. Scroll down and you should be able to make your choice.
cbehrent
Occasional Contributor

Re: Only want to monitor servers

Thanks for the reply.
I tried that but it's still finding everything like Hubs, Switches, Desktops etc.
Rob Buxton
Honored Contributor

Re: Only want to monitor servers

You can configure the IP Ranges it uses.
If you've not separated the IP Ranges for desktopns and servers you should consider doing this.

In the suggestion above you would need to ensure the Enable Filters is checked and then select the items you want to be allowed through.