HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

PMP 30% Memory Warnings

 
Mark_575
Frequent Advisor

PMP 30% Memory Warnings

Hello,

I've recently loaded PMP and now have several servers generating warnings based "High average Page Read Rate" with the recomendation to add more memory.

This server has 4Gb of ram and typically our in house application won't exceed 700Mb with windows 2003 SP2 running.

Why is the threshold so low at 30% which appears to be the maximum permissable value.

please see attached

Any information on how to resolve this alert would be most welcome.


Many Thanks
Mark
2 REPLIES
pkrai
Trusted Contributor

Re: PMP 30% Memory Warnings

You can easily change the threshold value as per your requirement.

Thanks.
Mark_575
Frequent Advisor

Re: PMP 30% Memory Warnings

Hi,

But 30% is the highest value you can choose for memory for some reason.

See attached.

If you click on Options \ Performance Management Pack Options \ Set Performance Thresholds

Is this a registry value to increase this value? or is it based on some HP knowledge?