HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

PMP - Unsupported config

Regular Advisor

PMP - Unsupported config

i'd take a look at the previous topic about PMP, but without solution so ... :

I have a Proliant BL465C G1 server (2003 std x64 Sp1, Insight Agent 7.70) identifed in SIM 5.2 with PMP 4.7

When i assign PMP licenses : no pb but when i try to configure it : unsupported system

In the pmplog.txt, i only see the existing server monitoring by PMP, no error

Another point, i have a ProLiant DL380 G4, identified as a "Compaq Appliance Operating System" wich is not compatible with PMP (WINNT), is,there a solution to bypass it ?

ankit gupta_1
Trusted Contributor

Re: PMP - Unsupported config

Hi Eric

I read the PMP doc,Which is in clearly mentioned that PMP is not compatible with some HP server like DL360G5,G4.etc,As you have.

So please have a look once again in PMP doc which is located in DOC folder of System insight Manager.

It may help you.

Points are welcome.

Always Believe "The Best is yet to Come".
Regular Advisor

Re: PMP - Unsupported config

Oh! thanks

I was looking for this doc
Regular Advisor

Re: PMP - Unsupported config

Not all servers are supported by PMP . See doc