HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

PMP liscensing Problems

 
seedomang
Occasional Contributor

PMP liscensing Problems

When i try to Install a liscense on my proliant ML530 G1 I get the following error

ProLiant ML530 10..x.x.x Server does not have a serial number

This server has a serial number

Thanks

KP
3 REPLIES
Aravindh Rajaram
Honored Contributor

Re: PMP liscensing Problems

See if SIM has identified the serial number. You can check this out in the system page of the server. If not, make sure that the agents are installed and the SNMP configurations are correct and then re-identify the server.
seedomang
Occasional Contributor

Re: PMP liscensing Problems

I have re identified the server and the SNMP settings are correct. It still shows the serial number error.
Rob Buxton
Honored Contributor

Re: PMP liscensing Problems

If the server has had a System Board replaced there may not be a Serial No. in the BIOS.
You'll need to reboot the server and have a look in the BIOS settings directly and possibly enter the serial number that should be recorded on the outside of the box somewhere.

The ML530 seems quite old, is this server supported by PMP?