Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Power cycle HP ProLiant ML370 G3 via SIM v5.1 and iLO 2

Paul Henry
Occasional Visitor

Power cycle HP ProLiant ML370 G3 via SIM v5.1 and iLO 2

I'm trying to use HP Systems Insight Manager v5.1 to remotely turn on and off some HP ProLiant ML370 G3 servers, using the iLO 2 (aka management processor).

HP SIM v5.1 is running on a Windows Server 2003
Standard Edition (SP2) box.

When I attempt to do this (Tools > Management Processor > HP ProLiant iLO > Power Off ...) and get to the "Verify Target Systems" page, the "Tool Launch OK?" status indicates "No".

When I click "View details", this message appears:

"This tool cannot run on [IP Address] as it does not pass the conditions required for running it. WSMAN must be greater than or equal to : 1.0

The properties that [IP Address] has for the failing conditions:
WSMAN: Not installed."

Windows Remote Management (aka WinRM) is installed on the HP SIM v5.1 server, but no matter how it (WinRM) is configured, we still get the WSMAN not installed message. See attachment.

What am I doing wrong?
1 REPLY
pgustavsson
Frequent Advisor

Re: Power cycle HP ProLiant ML370 G3 via SIM v5.1 and iLO 2

Old thread, i know..

But it's a disappointment that it has no answer as i was searching for a solution to this issue myself.

For me the problem was that i was selecting the server in hp sim, you have to select the ILO interface instead, and then you can power cycle the server etc.

Br
Patric