HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

Proliant DL380 G5 & G3 misreporting

Occasional Advisor

Proliant DL380 G5 & G3 misreporting

I have two of these servers showing errors.

Server 1. G5 Shows error 6052 Advanced Memory Protection Advanced ECC Memory Engaged. The Advanced Memory Protection subsystem has detected a memory fault. Advanced ECC has been activated. User Action: Replace the faulty memory. Replaced all memory and mother board. Diagnostics show no issue from HP support level 2 . It also shows in the home page.

Server 2. G3 Shows Health Status issue on HPSIM but none on Home page.

The server 1. was escalted to upper level and I was told that the 8.15 64 bit PSP install would fix it.. Did that. No Change.

Thanks in advance
Capt Mike

Occasional Advisor

Re: Proliant DL380 G5 & G3 misreporting

Server 2. Is now working as disired. I went into Homepage and Logs then
Intregrated Logs and repaired all items.

Health status good now.

Which sadly leaves server 1. still showing memory issue. BTW I tried the Intergrated Logs marked repaired as well on server 1.

Capt Mike