HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant Support Pack install

 

Proliant Support Pack install

When I install the entire psp v.x I am able to pre-configure the homepage information such as the credentials for accessing it. That work great.
BUT we have lots of servers that no one configured these credentials. so the homepage cannot be accessed at all... Is there way to just have a pre-configured homepage executable to give to my techs to run?

I hope this makes sence

Thanks

JT
3 REPLIES
Rancher
Honored Contributor

Re: Proliant Support Pack install

Yes there is!
Go into the Version Control Repository Manager and select the Catalog tab. Then select the "configure a component" option to the left. This will bring up the configurable components. Just select the System Management Homepage version that you want and it will tkae you through the preconfiguration.

Re: Proliant Support Pack install

Thanks alot Rancher. could you tell me though where is the Version Control Repository Manager? on the Smart start CD?

Thanks

JT
Rancher
Honored Contributor

Re: Proliant Support Pack install

This is through the Insight Manager homepage on your CIMS server.

If you have the PSP in a folder, open the PSP. On the left side it shows the configruable components, There you can configure the homepage and save the settings. Then your techs can open the PSP on the servers, and install only the hommepage from the selections on the right side of the screen, which will be preconfigured.