HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Raid configuration in the data collection

 
OlivierV
Trusted Contributor

Raid configuration in the data collection

Hello.

I don't see the raid configuration in the data collection reports. I have the SMartcard type, the drive types but I can't see how the raid is/are configured like Raid 1 with 2 x 72 Gb..

Can I get this information from the data connector or only with the HP agents ?

Thank you.
3 REPLIES
sandeep_raman
Honored Contributor

Re: Raid configuration in the data collection

Hello OlivierV,

Afaik, data collection report would'nt give you raid level information.
Information that i have seen:

Array controller family
Firmware
Slot
Logicsal disk size
Physical disks

The best bet is to check ACU.

SRH
OlivierV
Trusted Contributor

Re: Raid configuration in the data collection

Yes, this is what I have seen too.
OlivierV
Trusted Contributor

Re: Raid configuration in the data collection

Well, it seems the raid configuration can't be collected