HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Repeated Alerts

 
RicardoC
Occasional Contributor

Repeated Alerts

Hi,

I've HP SIM 5.1 SP1 installed on a Win 2003 server and the db on a SQL 2005 SE.

The problem that i've is, when an event is triggered i receive more than one email event.

For, example when o reboot a server i receive by email at least 4 linkdown events.

How can i force HP SIM to send me only one alert instead of severals?


Thanks In Advance
Ricardo
5 REPLIES
Rob Buxton
Honored Contributor

Re: Repeated Alerts

That would depend on how you have the event handling set up.
Look at the events generated and see if what they are. You may be getting alerts for informational as well as major or critical alerts.
You'd typically control this behaviour by controlling the event handling tasks.
Rancher
Honored Contributor

Re: Repeated Alerts

You might also check your SNMP settings. I had this trouble as well. Go to the Trap tab, and make sure that you don't have a trap destination for your public snmp string. Once I removed that (leave the destination for the private string) I didn't receive duplicate events. Also, if you are using iLO, they can also send events which will trigger an e-mail.
RicardoC
Occasional Contributor

Re: Repeated Alerts

Hi,

Sorry for the delay on the answer.

I've upgraded t HP SIM 5.2 SP2, and i deleted all public entries in the SNMP.

But i continue to have duplicate e-mails.

Thanks
RicardoC
Occasional Contributor

Re: Repeated Alerts

Hi,

Found the problem.

In the SNMP Agent Service, Trap Tab i had duplicated entries (with and without dns sufix) in the comunity string of HP SIM.

Thanks
RicardoC
Occasional Contributor

Re: Repeated Alerts

.