HPE Community
Server Management - Systems Insight Manager
1753815 Members
8039 Online
108805 Solutions
New Discussion

Re: Running SIM 5.0 and Compaq Insight Manager Version 5.20

 
Rob Clements_1
Contributor

‎02-09-2006 01:53 AM

‎02-09-2006 01:53 AM

Running SIM 5.0 and Compaq Insight Manager Version 5.20

I need to test the newest version of HP Insight 5.0 SIM. I feel for sure that running this on a difference server on the same LAN as our copy of Compaq Insight Manager Version 5.20 will not cause any issues, just double checking since I do not have the time to correct any issues if that may occur
0 Kudos
Reply
1 REPLY 1
Darrin Rawls
Respected Contributor

‎02-09-2006 08:07 AM

‎02-09-2006 08:07 AM

Re: Running SIM 5.0 and Compaq Insight Manager Version 5.20

No issues with them both on the network. Be careful, since you have CIM32 running, that means you have SNMP setup on the managed nodes. The nodes will need to ahve the trap destination set for the new SIM server, and whatever community string set in SIM that you use (on the Global Protocols page). Also, if you restrict SNMP hosts in Windows, the IP of the SIM server will need to be added.

In SIM, under Configure/Configure-Repair Agents, you can have SIM set all that for you once you discover them initially....
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.