SIM 5.1 and FC switch MIB information

[Pasi Koistinen]

HP SIM 5.1 is reporting HP c-class blade system FC switch errors about 30-50 times in day.

But data from switch is not in right format.

I think there is no correct MIB in SIM, and there is no MIB files with newest firmware.

Switch is c-class embedded 4gb Brocade.

Any ideas to find correct MIB, or something else?

SNMP error:

Print Report: Event DetailsEvent Details: connUnitPortStatusChange


Event Identification and Details

Event Severity Major
Cleared StatusNot cleared
Event Sourcexxx.xxx.xxx.xxx
Associated Systemxxx.xxx.xxx.xxx
Associated System Status Normal
Event Timeon, 2007-xx-xx, 11:14 EET

DescriptionThe overall status of the connectivity unit has changed.

Recommended severity level (for filtering): alert
Assignee
Comments


Trap Details

Variable DescriptionValue
NO DATA
An overall protocol status for the port. This value of connUnitPortState is not online, then this is reported Unknown.ready

The user selected state of the port hardware.online

Mib data does not match the trap, make sure the latest version of the MIB is registered.

The SNMP OID is
1.3.6.1.3.94.1.10.1.17.16.0.0.5.30.4.72.222.0.0.0.0.0.0.0.0.10

Mib Information
The associated MIB File Name for this trap is fa-mib40.mib and the MIB identifier FCMGMT-MIB

[Christopher Knight]

We are having the same problem. Have you found a fix for this?

[ICT System]

We are also having this exact same event.

[Frank Iglesias]

we have been having a similar issue. was a resolution ever found? Thanks.

[Brassen99]

we have it also!

[patrick haynes]

An overall protocol status for the port. This value of rea
connUnitPortState is not online, then this is reported Unknown. dy

The user selected state of the port hardware. onl
ine


Mib data does not match the trap, make sure the latest version of the
MIB is registered. The SNMP OID is
1.3.6.1.3.94.1.10.1.17.16.0.0.5.30.5.162.213.0.0.0.0.0.0.0.0.9


Mib Information
The associated MIB File Name for this trap is fa-mib40.mib and the
MIB identifier FCMGMT-MIB

[SCC (Kavanagh) Support]

Please can you advise if this issue was resolved.? If it was, what actions were taken?

Thanks
Mark

[Kenneth!]

Hi,

Having the same issue here, same hardware (c7000 with Brocade SAN switches.)

I was trying to filter out this event with the automatic event handling but I wasn't successful in only filtering something with keywords: connUnitPortStatusChange

Any help would be appreciated.
Maybe I can successfully use event handling when the correct MIB is loaded?

[Kenneth!]

Hi,

Anyone with some news on this?

Cheers,
Kenneth

[patrick haynes]

after speaking with HP, and they reviewed the logs and suggested to reboot it and see if it occurs again. So after rebooting it last weekend, the error has not re-occured. however its only been a week, i will update should it occur again.