SIM 5.2.2 & Brocade silkworm

[marsh_1]

fabrizio,

also on the switch command agcfgshow will display snmp setup.

[Fabrizio Maggioni_2]

I don't know the "snmpmibcapshow" command.I will check it as soon as possible.About trap destination, the SMI Agent is installed on the same SIM server.

I found out the devices are not resolved by IP to HOSTNAME on the DNS server.I think the problem is this one.

Can you confirm, please?

Thanks.
Fabrizio

[marsh_1]

fabrizio,

on the switch the snmpmibcapshow command will show you which events are configured to send an snmp trap. the
agcfgshow command should show you the snmp destination, community strings etc although these are probably best viewed in the switch gui.

good luck

[marsh_1]

fabrizio,

the dns hostname to ip resolution should'nt affect traps getting to hp sim if you have specified hp sim server ip address in the switch snmp trap destiination or hp sim server name is resolvable. the switches themselves will probably appear in hp sim as an ip address
rather than their name if they are not in dns.
either enter them into dns or they can be renamed in their settings tab in hp sim.

good luck

[Fabrizio Maggioni_2]

No, they are with hostname because SMI Agent provide them with hostname.Into SIM there is no information about their IP Address.

Regards,
Fabrizio

[marsh_1]

fabrizio,

did you check the snmpmibcapshow command ?

[Fabrizio Maggioni_2]

Hi,

I will be on site Friday.I will check it.

Thanks.
Fabrizio