Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SIM 5.2 can't see my SMI-S CIMON on EVA Host

Chotiwit Jiratrakarnkit
Occasional Contributor

SIM 5.2 can't see my SMI-S CIMON on EVA Host

I have a problem while config SIM with EVA host
After follow step verify communications between CMS and EVA host.
I've got this result while trying to identify system

"Checking for WBEM support on system.
This system does not have any SMI-S CIMOM installed
Running WBEM rules based identification.
Got ComputerSystem WBEM/WMI data from the system"

But I've installed the SMI-S CIMOM already.

I use SIM verion 5.2 and Command View EVA Ver.7.00.01.071011.

Please Help.
1 REPLY
Rob Buxton
Honored Contributor

Re: SIM 5.2 can't see my SMI-S CIMON on EVA Host

The system you will need to identify is the server hosting CommandView.
Installing CommandView and HPSIM on the same server is not supported.
Also you will need to ensure WBEM is enabled globally, but you can leave the global credentials blank. For the server hosting CommandView use server specific wbem credentials overriding the global and enter the credentials that you entered when the SMI-S component of CommandView was being installed.