cancel
Showing results for 
Search instead for 
Did you mean: 

SIM 6.0

 
Tuscani_1
Frequent Advisor

SIM 6.0

I am getting ready to build anew SIM\RSP server. I plan to start over clean as I have not customized SIM enough to justify a migration from 5.3. I had planned to make CMS 2008 R2 x64.. is it true RSP will not support 2008 R2?
7 REPLIES
DanN_4
Occasional Advisor

Re: SIM 6.0

It is not supported on R2

Supported Hosting Device Operating Systems

â ¢ Microsoft Windows Server 2003 or 2008 Standard or Enterprise Edition for x86 with SP1 (running
on x86 or x64/AMD64 platforms)
â ¢ Microsoft Windows Server 2003 or 2008 for x64
â ¢ Microsoft Windows 2003 or 2008 SMB, with SP1
â ¢ Microsoft Windows 2003 or 2008 Server with installed Multilingual User Interface Pack (MUI)
â ¢ Microsoft Windows 2003 or 2008 with English, French, Italian, German, Spanish and Dutch International
Server

You can install on VMWare guest but NOT Hyper-V
Tuscani_1
Frequent Advisor

Re: SIM 6.0

Do you know if this will change?
DanN_4
Occasional Advisor

Re: SIM 6.0

I was told they were working on it for a future release, not ETA
Tuscani_1
Frequent Advisor

Re: SIM 6.0

Ok, thanks
David Claussen
Regular Advisor

Re: SIM 6.0

A question then; I was waiting for SIM 6 to arrive so that I could install SIM only on a new Windows server 2008 R2 x64 machine. Can I still do this or not?
Tuscani_1
Frequent Advisor

Re: SIM 6.0

I understand SIM itself will run fine.. but not RSP
Change_happens
Honored Contributor

Re: SIM 6.0

SIM runs fine on 2k8 R2. keep in mind sim 5.3 on 64 bit system is not a 64 bit application but SIM 6.0 on 64 machine is a 64 bit application.
if you are running 5.3 on 32 bit machine take your backup of data as precaution.