Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SIM + Brocade SMI-S agent

Alessandro Narzisi
Occasional Contributor

SIM + Brocade SMI-S agent

Hi to all,
i tried to import 2 SAN switch Director 48000 and 2 SAN MPR Silkworm 7500 in HP SIM, i had install SMI-S in a host 10.145.138.100, when I try to run wbemdisco i received the CIM_ERR_INVALID_PARAMETER, i attached the log.
Someone can help me.
2 REPLIES
Alessandro Narzisi
Occasional Contributor

Re: SIM + Brocade SMI-S agent

Thanks bpe,
i tried also https and the output of wbemdisco is the same, but when i run a new discovery for 10.145.138.100 in HP SIM i didn't see the switch in "Storage System-All Storage Switches".
I can add the switch in another way?
Thks
Alessandro
PS:
In attachment the log of discovery.
BPE
Esteemed Contributor

Re: SIM + Brocade SMI-S agent

I saw the error in the discovery log.
I think this will be not easy to fix.
Checking the SMI-S cimon log and SMI-S Provider log on the managed system that you will know which of the devices generates the problem.

In the mean time you can discover the IP addresses of you SAN switches. If the system types are already defined in SIM they should go directly to your SAN Switch collection.
The big difference is that you do not see the port status of your switch.