Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SIM detects false blade server in c-3000 enclosure

lex_11
Occasional Advisor

SIM detects false blade server in c-3000 enclosure

Hi all,
I have a problem, SIM can't correctly indentify one of our blade servers which is in C-3000 enclosure.
SIM detects the blade tough, but in different enclosure, I've deleted the entry a couple of times and started a new search, but the blade was every time in another enclosure?
I have found out that this specific blade once was phisicaly in another enclosure... could it be, that the enclosure stores some kind of inventory information,

1 REPLY
David Claypool
Honored Contributor

Re: SIM detects false blade server in c-3000 enclosure

OA tells HP SIM what blades are in the enclosure, and it updates this on a daily basis through the Daily Device Identification task. If you move a blade, its location won't be updated until the next time DDI is run. You can run it manually to update it.

If the problem persists, you can check the information that OA is passing back to HP SIM by querying the OA (both the one that has the blade and the one that used to have it) with

http://[OA_IP_OR_DNS]/xmlquery?item=all