Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SIM not reporting process monitoring traps

Dave Bannister
Occasional Contributor

SIM not reporting process monitoring traps

This may not belong in the SIM forum but on each server in the control panel HP has management agents configuration. When you double click on this you have a tab called Process montioring. When I setup a processs to be monitored for stop and start I do not get any traps sent to the SIM server. Has anyone setup Process Monitoring before?

Is the problem on the server side or SIM side?

Regards,
Dave
1 REPLY
Rob Buxton
Honored Contributor

Re: SIM not reporting process monitoring traps

Yes, the process works.
To test where the issue is use the Trap Send in the same GUI.
Do you get an event generated? - if not then check you have the SNMP Tape Destination set to point to the HPSIM Server.