HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SIM5.0 adjustment process of false detection

 
atsushi_3
Occasional Contributor

SIM5.0 adjustment process of false detection

An adjustment process of false detection
I use SIM5.0SP5.
I made a mistake in iLO of a Blade server and have already set an IP address of existing iLO.
I revised iLO afterwards after having detected it in SIM.
However, I detected it on SIM again.
The detection of a Blade server did not have a problem.
It has been added to registration of the Blade server which iLO which did the booking which I detected belonged to last when I detected iLO.
An IP address of another server and an IP address of a pertinence server are originally displayed by detailed indication of a server when I confirm it in SIM.
I want to know a process to improve this problem.
2 REPLIES
Rob Buxton
Honored Contributor

Re: SIM5.0 adjustment process of false detection

The easiest fix may be to just delete the invalid server or ILO and manually rediscover it.
atsushi_3
Occasional Contributor

Re: SIM5.0 adjustment process of false detection

I already deleted it, and it was not good even if I did rediscover many times......