Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SMH for HP UX 11.11

Sundar G
Frequent Advisor

SMH for HP UX 11.11

Hi All,

A question about SMH installation in HP UX 11.11 L Class server environment.

From where we can download the SMH software,could you please send me the link.

Also it would be great if you let me know the other dependencies for installing WBEM providers in HP UX 11.11. i am able to install only LVM provider right now.

Thanks in Advance

Regards

Sundar G
10 REPLIES
Shinji Teragaito_1
Respected Contributor

Re: SMH for HP UX 11.11

Hi,

You can download a SMH depot file for 11.11 from the softwaredepot site:

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=SysMgmtWeb

LVMProvider needs the WBEMSvcs bundle (WBEMServices) A.02.05 or greater.

* LVMProvider
http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=LVMProvider
* HP WBEM Services for HP-UX 11i
http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=WBEMSvcs

I presume you already have WBEMSvcs which needs OpenSSL.

* OpenSSL
http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=OPENSSL11I

Hope this helps you,

Shinji
Sundar G
Frequent Advisor

Re: SMH for HP UX 11.11

Thanks for the Reply ,,

I installed SysMgmtWeb. But even now i am not able have SMH installed in my HP ux 11.11 server. Swlist output is below.

ERROR: Software "SysMgmtHomepage" was not found on host xxxxxx.

I installed Openssl, WBEMServices as you have suggested. Is there any other depot file i need to download for SMH.

Please help. Thanks in Advance

Regards

Sundar
Shinji Teragaito_1
Respected Contributor

Re: SMH for HP UX 11.11

Hi,

SMH A.2.2.9 needs OpenSSL and HP-UX Apached-based Web Server
(hpuxwsAPACHE) A.2.0.49.00 or later.

Please install Apache available from the following page:

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPUXWSATW222

Regards,
Sundar G
Frequent Advisor

Re: SMH for HP UX 11.11

Thanks Shinji,

I installed apache it came up well. I wish to know is there any version of "File System CIM Provider" for HP UX 11.11 version available?

Thanks in Advance

Sundar
Shinji Teragaito_1
Respected Contributor

Re: SMH for HP UX 11.11

Hi Sundar,

Yes, there is. But FileSysProvider B.11.01 is available only on 11.11 Application Media since June 2007. I'm afraid to say you can NOT download the bundle from the softwaredepot website.

Regards,

Shinji
Sundar G
Frequent Advisor

Re: SMH for HP UX 11.11

Hi Shinji,

Thanks for the reply. I will search for the DVD here. BTW, i was getting syslog messages shown below related SFM.

Feb 4 11:58:13 xxxxxx cimserver[26111]: PGS13606: A failure was detected in provider module SFMProviderModule. The generation of indications by providers in this module may be affected. To ensure these providers are serving active subscriptions, disable and then re-enable this module using the cimprovider command.

Feb 4 11:58:13 xxxxxx cimserver[26111]: The generation of indications by providers in module SFMProviderModule may be affected. To ensure these providers are serving active subscriptions, disable and then re-enable this module using the cimprovider command.

Then i gave the following command to clear this error,

cimprovider -d -m SFMProviderModule
cimprovider -e -m SFMProviderModule

Is this a temprorary warning or any permenant fix available?

Once again thanks for reply.

Regards

Sundar
Shinji Teragaito_1
Respected Contributor

Re: SMH for HP UX 11.11

Hi Sundar

> Is this a temprorary warning or any permenant fix available?

I don't know exactly. But it may be possible by having the lastest SFM.

Eventually what kind of software versions are you using ?

% swlist | grep -e HPUX11i -e SysFaultMgmt -e SysMgmtWeb -e WBEMSvcs -e OnlineDiag
% swlist -l product | grep openssl

Can you confirm if your L-Class server model is supported in the SFM
version release notes ? You can jump to the proper Release Notes
page from the following page:
http://docs.hp.com/en/diag/sfm/sfm_table.htm

I'd like to confirm if there're some error messages in
/opt/sfm/log/sfm.log.

Thanks in advance,

Shinji
Sundar G
Frequent Advisor

Re: SMH for HP UX 11.11

Hi Shinji,

Here is the swlist output.

HPUX11i-OE,r=B.11.11.0109,a=HP-UX_B.11.11_32/64,v=HP
OnlineDiag,r=B.11.11.06.09,a=HP-UX_B.11.11_32/64,v=HP
SysFaultMgmt,r=A.04.00.04.02,a=HP-UX_B.11.11_32/64,v=HP
SysMgmtWeb,r=A.2.2.9.1,a=HP-UX_B.11.11_32/64,v=HP
WBEMSvcs,r=A.02.07.02,a=HP-UX_B.11.11_32/64,v=HP

It seems i a having several sfm log errors, may be at the time of retrieval of info thru web access. I am pasting here it .

02/04/09 21:51:08 ConsolidatedStatusProvider WARNING 23536 2 Internal error enumerating members:CIM_ERR_FAILED: Inventory is
being built currently. Please try after some time.

02/04/09 21:51:16 HealthStateProvider WARNING 23536 11 Retrieval of GroupOperationalStatus failed for one or more subsystems.

02/04/09 22:00:26 ConsolidatedStatusProvider ERROR 23536 2 Internal error during DeleteInstance for:CIM_IndicationSubscriptio
n CIM_ERR_NOT_FOUND: CIM_IndicationSubscription

Thanks for your help again.

Regards

Sundar
Sundar G
Frequent Advisor

Re: SMH for HP UX 11.11

Shinji & NMCI Group,

Thanks for your valuable suggestions. I am able to configure SMH on HP UX 11.11. But few of the options are missing. For example,
the entire System Configuration menus are missing. Usually it would contain,
Accounts for users
Disks and File Systems
Kernal Configuration
Peripheral Devices
Security Attributes Confiugration (web based)

As Shinji rightly said, i may need to go for Application DVD Media released in June 2007. Please let me also know, where can i look for modules which provide the other options listed above?

Thanks a lot in advance, it would be wonderful when an old system gets new features.

Regards

Sundar
Shinji Teragaito_1
Respected Contributor

Re: SMH for HP UX 11.11

Hi,

I have the same observation as you. As of today, 11.11 SMH doesn't provide the similar functionalities such as 11.23 and 11.31. That
means SAM is the main system adminitrator tool on 11.11.

I believe evweb works correctly even on 11.11.

Shinji