SNMP Webagent missing

[scissorhand]

I have one server that is missing SNMP webagent settings from System Management Homepage, settings tab.

The server was earlier missing the SNMP service but I installed that and then reinstalled HP Insight Management Agents but the SNMP webagent settings are still not showing. Any help what should I check next?

[Daniel Leblanc]

After all of this does you re Home page managent work?
And if yes, do you have any information showing?

[NJK-Work]

Are any of the agent options disabled in the "HP Management Agents" applet in the Control panel?

Nelson

[scissorhand]

Home page management works ok, except SNMP webagent settings are missing.

HP Management Agents applet in the Control panel shows following Inactive Agents:

Clustering Information
Rack Information
Remote Insight Information

All other are active.

HP Systems Insight Manager show the server as Unknown system type.

[Newton S · Accepted solution]

On the Server ,go to services--> snmp service properties-->Security
ensure your SIM server IP is present under "Accept SNMP packets from these hosts".

once done restart the SNMP service

[Mika Äijö]

HilariousFascinator, thanks for help - that solved the problem

[scissorhand]

that solved the problem - thank you

[steven elder]

I am having the same issue. I have checked the above settings are all are the same. I did add the ip address of the server into the security tab of the SNMP Service, but this slowed down the System Management Homepage and I received a timeout error. I changed it back to "Accept SNMP packets from any host".