Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP With HP SIM

Perrocheau
Occasional Visitor

SNMP With HP SIM

I want to install snmp on hp insight manager and I have a problem. I have put my community to public because I use this community name on my nagios server. I have install SNMP service on my Windows 2008 server.

Setting SNMP READ-WRITE community string .............................[FAILED]
READ-ONLY community string not updated because it already exists with different
rights."
Setting SNMP trap destination .......................................[SUCCESS]
Update SNMP setting to accept SNMP requests from the HP SIM instance.[SUCCESS]
Set Trust relationship to "Trust by Certificate"
Set Trust relationship to "Trust by Certificate" ................... [SUCCESS]
Added this instance of HP SIM to the trusted certificate list for System Managem
ent Homepage 2.0 or later.


Successfully restarted necessary management applications to ensure that all succ
essful changes will be effective.
Sending SNMP test trap (START)...
Sending SNMP test trap .............................................. [FAILED]
Could not load SNMP Trap generating utility.
1 REPLY
Rob Buxton
Honored Contributor

Re: SNMP With HP SIM

I'm a bit confused by this. HPSIM requires SNMP be installed before it starts the install.
have you removed SNMP?
If this is the HPSIM Server then there should be both SNMP and SNMP Trap Send installed.

You can set the properties, community names etc. from the Services box.
It should be able to cope with public as a community name.