HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP mailing

 
SOLVED
Go to solution
Pradep
Regular Advisor

SNMP mailing

Hi all,

i have dataprotector servers to send snmp traps. but i need those traps to be sent to me as email.
could you please tell me what is required to be done for that?
what software for get mails for those snmp alerts and where to install ? is that only snmp can do it ?
please guide me to some document which explains the configuration steps in details.

thanks so much.
pradep
4 REPLIES
ramesh_naik_
Esteemed Contributor

Re: SNMP mailing

Hi Pradep,

Try this and check whether it helps!!!!

http://docs.hp.com/en/5991-4498/ch12s01.html#ISconfigureEmailSettings

All the best!!!

Regards,
rmn
Pradep
Regular Advisor

Re: SNMP mailing

Hi Ramesh,

i think this doc is about HP insight manager settings to send email using gui.
i dont have insight manager.

can i use any other freeware in place of it ?
or any setting in SNMP to directly send email-alerts ?

regards,
pradep
Rob Buxton
Honored Contributor
Solution

Re: SNMP mailing

Are you using HPSIM? Your e-mail is not clear.

HPSIM can receive SNMP Traps and then generate events, HPSIm can then send an e-mail of that event.

Pradep
Regular Advisor

Re: SNMP mailing

Hi,

i tried install and configure HPSIM and its sending the email with all the details.

But i need to filter it based on the Error codes in Dataprotectore like some text in the message "90:54" or "90:59". Also want to change the contents of the mail. to show only relevant information to me.

Is it possible to contomize the email ?

thanks,
pradep