HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Server Operational (6026) Message within each planned reboot

 
Gerspacher
Occasional Contributor

Server Operational (6026) Message within each planned reboot

Hello!
One of our servers (DL 380G5) generates a message in the hp sim events log: "Server Operational (6026) - The server is operational again. The server has previously been shutdown due to a thermal anomaly on the server and has just become operational again.".

We had a thermal shutdown weeks before, since this event we get this message after each reboot.

All logs are cleared, Ilo2 was resetted. What else can we do?

Thank you!
Kind regards,
Oliver
4 REPLIES
James Kennedy_4
Trusted Contributor

Re: Server Operational (6026) Message within each planned reboot

I've had this with blades before after a thermal shutdown. Only way to clear was to actually remove all power from the server. See if that fixes it.
Ken Krubsack
Trusted Contributor

Re: Server Operational (6026) Message within each planned reboot

And if that doesn't resolve it, something probably got cooked in the overheat (I'm assuming overheating as opposed to too cold).

Overheats can be nasty. I said in reponse to someone else's post I've seen servers survive 'em with no ill effects and I've had to completely replace servers after an overheat-triggered shutdown. Depends on what (if anything) got cooked.
Gerspacher
Occasional Contributor

Re: Server Operational (6026) Message within each planned reboot

Hello!

Sorry, but the shutdown of the server was not the solution. the server were unpolugged for about 1 minute, but we even get the error message 6026.

I have also updated the insight agent to version 8.30, but noch success.

Restarting the server always generates the message 6026!

It is interesting, that the message does not appear in any of the server logs (IML, ilo), but it is shown in the hp sim console. So i think it must be a snmp trap send by the agent.

Any other idea?
Thanks in advance
Gerspacher
Occasional Contributor

Re: Server Operational (6026) Message within each planned reboot

Hello once again!

Updating the agent to version 8.30 was not the solution, but only at first look. Doing a reboot was the solution, after this reboot i got no more error messages.

Thanks for your help!

kind regards,
Oliver