Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Server shows a warning, but no warnings visible

JoostdeHeer
Advisor

Server shows a warning, but no warnings visible

I have one server which shows a yellow warning triangle in health status // SNMP, but both the expanded SNMP status and the SMH of the server show no errors whatsoever.

 

How can I find out what is causing this warning?

 

See attached screenshots for the SIM detail page of the server and the SMH.

 

Some details:

SIM 7.3 on Linux with june 2014 patch

Server runs on RHEL Linux 5.0 with SNMP agents 9.50-2564 and SMH 7.3.2-1

 

Joost

6 REPLIES
n0kia
Valued Contributor

Re: Server shows a warning, but no warnings visible

Hover your mouse over the minor status from the system page, what is the error?

JoostdeHeer
Advisor

Re: Server shows a warning, but no warnings visible

Hello N0kia,

 

You mean in the 'All systems' page in SIM? I see 'There's a minor problem that is causing limited interference,' (see screenshot) when I hover over the warning. See screenshot. So no extra information on what is wrong exactly there either.

 

Joost

n0kia
Valued Contributor

Re: Server shows a warning, but no warnings visible

Hello,

 

 

Can you try updating the FW on the ilo, clear the IML log, run HW status polling.

 

 

 

 

JoostdeHeer
Advisor

Re: Server shows a warning, but no warnings visible

Hello,

 

- ILO is, as far as I know, on the last patchlevel (ILO2 2.25)

- IML had a few cleared events, I've cleared it to be safe, but 2 hours later the warnings are still present

- I've already tried deleting and rediscovering the server, but the warning still exists.

- I've run HW status polling, said that it was succesfully completed, but the warning still exists.

 

Joost

n0kia
Valued Contributor

Re: Server shows a warning, but no warnings visible

I wonder if the agents are not working correctly when reporting the status.

 

I would try downgrading your hp-snmp-agents on your linux machine to a revision lower or two then delete/add it back into sim.

 

 

JoostdeHeer
Advisor

Re: Server shows a warning, but no warnings visible

Hello,

 

I've decided to give up on solving this and I'm accepting that a few servers (it's not just this one, there are some others) will show a warning. Thanks for the help though.

 

Joost