Solution: Blade pictures not right in SIM

[J.Kopp]

I think the reason for this problem was firewall blocked SNMP traffic between iLO network and server network.

Solution:
1. I let enable SNMP Traffic(ports 161-162) and SMH (2381) to iLO network.
2. Removed all blades, Encl and Racks from SIM
3. Updated BladeSystem IM Plug-In for SIM from v2.1 to 2.2
4. Re-discovered iLO network as first.
5. Re-discovered server network ...
... and finally I can see all enclosure details and funny pictures in SIM!
see attached screenshot.
ciao
Juergen

[bruno roncoroni]

Hi,
I have HPSIM 5.0 SP5 on Proliant DL320 with Windows 2003 SP1 french
I have a p-class rack
Firmware Revision 2.30
iLO 1.88
Two CGESM Version 12.2(25)SEE2
I see the blade but not the switch
To see document joint
Thanks

[Yvan Lefevre]

Bruno,

I had the same problem: did you configure SNMP on the switches themselves ?

Regards,
Yvan.

[bruno roncoroni]

Yvan,

I have right addition a line in the file of configuration
snmp-server community public RO
is what it is sufficient

Thanks for assistance

[Yvan Lefevre]

I didn't do it my self as it's the property of the network guys :)

But here is a screenshot of how they have configured it...

(I did change the names and IP)
IP of the SIM server: 192.168.0.17
Community: MYCOMM

Once it's done, do a discovery of the switches from HPSIM's Options/Discovery menu.